20X magnification consisting of 10X eyepiece and 2X objective lens provides sharp images of detents. Focusable eyepiece assures sharp focus on reticle. Crossline reticle measures up to 7mm in both X & Y in 0.1mm increments. Large knurled ring provides smooth, accurate focusing. Unique vertical illuminator eliminates shadows. Focusable flashlight provides annular illumination uniformly highlighting the entire edge of any size detent. Two interchangeable base adapters are standard.1.5\" Diameter for stability. 9/16\" Diameter for fillet weld inspection Durable hardwood case with foam inserts to protect all components.

For laboratories that require a package to retrofit an existing microhardness tester the Clemex CMT software kit is the solution of choice. Using your own computer, install easy to use Clemex CMT software, an acquisition board, and high-resolution camera.

If your laboratory needs a robust solution for high throughput environments, then the automatic solution is the path to take. Fully equipped with a state of the art microhardness testing machine, ASTM E and DIN/ISO 6507 compliant software with a high resolution camera and a high performanced computer you can rest assured that you\'ll have all you need to extract fast, accurate and repeatable test results.

* automatic loading mechanism
* load apply speed 50 micron/sec
* software interfaced loading dial, 10,25,50,100,200,300,500 and 1000gf.
* dwell time 5-40 sec
* manual turret
* 10x and 50x objectives
* light 6v, 18w
* x-y stage 50mm x50 mm
* maximum movement 25mm in both axis
* maximum height of specimen 95mm
* maximum depth of specimen 160mm
* 110v, 60hz, single phase
* conforms to astm (e-384)
* one vickers or knoop indenter
* one vickers or knoop test block

 When performing a microhardness test run, easy to use software will instruct the operator to move the stage to a predetermined location for each indent or measure to be made. Data is then displayed in the results windows where it can be exported to MS Excel or printed for report generation purposes. Used in conjunction manual or digital micrometer spindle, the semi-automatic solution is the perfect solution for laboratories that process a low number of samples.

 TYPE A: TESTS LOADS 0.3, 0.5, 1, 3, 5, 10, 20, 30kfg, automatic loading and realising, automatic turret, 10X & 20X objectives, hardness standard block (HV800)

TYPE B: TESTS LOADS 1, 2, 3, 5, 10, 20, 30, 50kfg, automatic loading and realising, automatic turret, 10X & 20X objectives, hardness standard block (HV800)

Scale and general hardness range should be submitted to us with your purchase order for these blocks. A traceable calibrated test certificate is supplied with each test block. The test results will conform to the appropriate ASTM standards designation(E10, E18, E384).

MICROHARDNESS DIAMOND INDENTERS
Vickers and Knoop diamond indenters are available for all models of microhardness testers on the market. Contact us for pricing to cover your specific requirements. We also provide a relapping service to sharpen these indenters to required specifications.

1.3mp (1280 x 1024)

2.0mp (1600 x 1200)

3.0mp (2048 x 1536)

5.0mp (2592 x 1944)