|
* Compact and powerful... * Fully automatic operation... * Microprocessor controlled... * Pulse cutting technique... |
|
METACUT |
|
® |
|
METACUT-A350 Fully Automatic Cutting Machine |
|
METACUT-M350 Manual Cutter |
|
Large Cutting Chamber |
|
Touch-Pad front panel |
|
Design |
|
METACUT 250 and METACUT® 350 are designed for wet cutting of large and small, regularly or irregularly shaped work pieces of metallic, ceramic or composite materials. METACUT 250 has the capacity to cut solid sections up to 90 mm in diameter. The cutting capacity of METACUT 350 is 130 mm. The side access port permits the sectioning of extra-long work pieces, as well.
METACUT cutting machines are available in Automatic (A) and Manual (M) versions.
The machine is equipped with a powerful motor, driving the cut-off wheel towards the work piece. The bottom part of the machine is a large robust alloy base casting. The cutting table is provided with T-Slots increasing the versatility so that different clamping sets can be mounted. The quick-clamping devices are removable to permit the installation of conventional clamping tools to hold larger or more intricate work pieces.
The complete system is enclosed in a protective hood with a large shatter proof window to observe the cutting process. The cutting chamber inside is illuminated with a 12-Volt sealed lamp. METACUT has the highest safety standards. The interlocking safety device does not allow the motor to be started unless the hood is closed. The hood can not be opened before the motor is stopped. The electronic brake system, which is a standard feature, brings the cutter to a quick full stop in seconds after it has been switched off.
A closed loop re-circulating cooling unit is a standard part of the machine. The cutting surface is cooled by spray nozzles whose water jets hit both the cutting wheel and the specimen. This provides an efficient cooling of the sample and prevents the overheating of the surface structure. |
|
METACUT 250 and METACUT 350 are the ideal abrasive cut-off machines for metallographic samples, offering perfect solutions for efficient, versatile and reproducible high-quality cutting. |
|
Page 1 |
|
Page 2 |
|
Page 3 |
|
Page 4 |