METACUT BROCHURE

METACUT-M250 Manual Cutter

METACUT-A250 Automatic Cutter

METACUT-M250 with

Floor Cabinet

Stainless steel clamping
devices and T-slotted table

METACUT automatic models METACUT-A250 and METACUT-A350 both have a sophisticated hydro-pneumatic system and microprocessor technology controlling the automatic operation. Clamp the sample in the vices, set the recommended cutting force and feed rate, then press the “Auto-cut” button. The motor starts, coolant flows, the cutting wheel advances and cuts through the section then returns to its initial position and stops.

Controlling cutting force and the cutter feed creates reproducible cutting conditions which results in superior surfaces consistently. When sectioning complex specimens, the controlled cutting force allows the cutting rate to vary according to the thickness being cut, resulting in evenly cut surfaces. The motor current is monitored with an “Overload Display” (LED bar graph) on the front panel.

Pulse cutting technique, in principle, makes a series of uniform small cuts. This action reduces the surface contact friction rate and eliminates the risk of overheating.

Pulse cutting mode, selectable from the front panel is specially designed to section “Hard to Cut” materials.

Automatic operation reduces the labor costs. The time required to operate the machine is considerably lower. Controlled cutting force and automatic feed and the pulse cutting technique minimize wheel wear and consequently reduce operating costs.

Clamping Devices

Many sample preparation applications require the sectioning of a specimen from a small or irregularly shaped sample or component part. The small size or irregular sample shape can create positioning and clamping difficulties for the operator.

METACUT series are equipped with stainless T-slot clamping tables. All clamping devices are made of stainless steel and can be attached to the cutters T-Slot beds in seconds for fast, positive clamping of parts having virtually any configuration.