|
Large cutting chamber for fast and efficient precision cutting (MICRACUT 200) |
|
GR 0548 |
|
GR 0546 |
|
GR 0556 |
|
MICRACUT 200 High Speed Table-Feed Precision Cutter |
|
Design & Operation MICRACUT 200 is built on precisely manufactured heavy duty aluminum frame providing stable and vibration resistant base for precision components and linear bearings. Cutting compartment is fully enclosed. The transparent hood is equipped with interlocking safety switch. Powerful DC cutting motor has variable cut-off wheels speeds from 400 up to 4000 rpm allowing both high speed and low speed cutting. By moving the cutting table, MICRACUT 200 can cut larger and deeper samples. Wide range of clamping tools can be used on the T-slotted moving table. Optional X-axis table with motorized drive mechanism positions the specimen with 2 microns positioning accuracy. Optional stand with manual positioning can accommodate all MICRACUT specimen vises with dovetail plates. The height of the cut-off wheel (Z-axis) can be adjusted up to 45 mm. Diamond, CBN and abrasive cut-off wheels up to 200 mm diameter can be used. By height adjustment (Z-axis), the wheel wear is easily compensated. Different flange sets are available which can be selected according to the requirement of maximum cutting capacity or max wheel support. The pre-selection of the feed rate (0.02–1.5 mm/sec) and force is possible on the front panel. The feed rate is automatically adjusted, if needed reduced, resulting in perfect cuts and eliminating sample and machine damage. |
|
MICRACUT 200 High speed Table-Feed Precision Cutter |
|
Clamping Tool |
|
Various clamping tools and accessories are available for different specimen geometry and applications. For details of the specimen vises, please see page 5. Accessories available for MICRACUT 200 are as follows: GR 0546 Automatic X-axis table for digital positioning and digital readout in the X-axis with 2 microns positioning accuracy. GR 0547 Stand for specimen vises with dovetail plates. GR 0556 Manual X-axis positioning unit, including the stand for specimen vises with dovetail plates. GR 0548 Quick acting clamping vise assembly. 1501 Vertical Clamping Device with clamping shoe. |
|
Page 1 |
|
Page 2 |
|
Page 3 |
|
Page 4 |
|
Page 5 |
|
Page 6 |